Ski Bracket Install

GUIDE:

You will need:

Four ski brackets
12 x T30 thread forming screws
A T30 driver or ratchet

Each bracket is specific to a position on the rack. Front Left, Back Left, Front Right, Back Right. Refer to the image below for location and orientation.

For each bracket, fasten one screw, then twist the bracket to line up the next hole and fasten the other two. Repeat.

The brackets have three sets of holes which allow you to adjust the angle of your skis/board. Refer to the image below for this adjustment.

Ski Bracket Install

GUIDE:

REFERENCE GUIDE

0 DEGREE SETTING

5 DEGREE SETTING

10 DEGREE SETTING